Zortrax Inventure

Powerful Device of Innovation

Zortrax Inventure is an affordable desktop machine with capabilities found almost exclusively in large industrial 3D printers: a dissolvable support system, an enclosed heated printing chamber, a built-in HEPA filter, and a capability to work in dual or single extrusion modes. Compatibility with a wide range of filaments like nylon or highly durable ABS blends makes Zortrax Inventure a versatile tools for engineers, designers, and doctors.

Zortrax Inventure can 3D print movable mechanisms in one go. The heated chamber keeps the right temperature to minimize shrinkage and achieve high dimensional accuracy. Soluble support structures can be removed from between tightly interlocked parts just by rinsing the model in water.



Single and Dual-Extrusion

Inventure supports single and dual-extrusion modes.

Enclosed Printing Chamber

The build platform is sealed off from the environment to ensure controlled 3D printing conditions.

Built-in HEPA filter

A HEPA filter intercepts over 99% of 3D printing emission.

External Materials Support

Third-party filaments available on spools are fully supported in both single and dual extrusion modes.

3D Printers


In dual-extrusion mode, Zortrax Inventure prints supports out of Z-SUPPORT Premium, a BVOH water-soluble filament. They can be removed in Zortrax DSS Station wich keeps the water at optimal temperature and circulates in around the model to achieve high dissolution rate. Supports printed on the Inventure in the single-extrusion mode are made of the model material and have to be removed mechanically.

Step 1 Put into water

Take the model off the build tray and submerge it in water inside the Zortrax DSS Station.

Step 2 Rinse

Take the model out of the Zortrax DSS Station. Sometimes it’s necessary to remove remnants of support with a brush included in the kit.

Step 3 Remove supports

Step 3 Dry

Carefully dry the model once the support dissolution is done. That’s all. The support structures are gone.

3D Printers



Build volume 135 x 135 x 130 mm (5.3 x 5.3 x 5.1 in)
Nozzle diameter 0.4 mm (0.016 in)
Extruder Dual, printing with model and support material
Extrusion Dual/single
Hotend Dual
Material detection sensor Yes (for filaments in cartridge only)
HEPA Filter Yes
Connectivity SD card (included)


Dedicated for single extrusion Z-ABS, Z-ASA Pro, Z-FLEX, Z-GLASS, Z-NYLON, Z-PETG, Z-PLA, Z-PLA Pro, Z-ULTRAT, Z-ULTRAT Plus
Dedicated for dual extrusion Z-ESD, Z-GLASS, Z-PETG, Z-PLA, Z-PLA Pro, Z-ULTRAT Plus, Z-SUPPORT Premium
External filaments Applicable
Support Mechanically removed – printed with the same material as the model Water-soluble – printed with a different material than the model
Filament container Cartridge or spool
Filament diameter 1.75 mm (0.069 in)


Software bundle Z-SUITE
Supported input file types .stl, .obj, .dxf, .3mf, .ply
Supported operating systems Mac OS Mojave* / Windows 7 and newer versions


Technology LPD Plus (Layer Plastic Deposition Plus) – advanced technology depositing melted thermoplastics with dissolvable support structures
Layer resolution 150-300 microns
Minimal wall thickness 450 microns
Platform levelling Automatic measurement of platform points’ height


Heated chamber Yes
Ambient operation temperature 15-30° C (59-86° F)
Storage temperature 0-35° C (32-95° F)


AC Input 110 V ~ 4 A 50/60 Hz; 240 V ~ 1.7 A 50/60 Hz
Maximum power consumption 300 W